IOT USA
BL101 Modbus MQTT Gateway
Couldn't load pickup availability
BL101 Modbus to OPC MQTT Gateway
Modbus Gateway BL101 is an industrial IoT gateway that converts Modbus RTU and Modbus TCP into Modbus TCP, OPC UA, MQTT, Huawei Cloud IoT, AWS Cloud, ThingsBoard Cloud and other protocols.
Introduction
Modbus Gateway BL101 is an industrial IoT gateway that converts Modbus RTU and Modbus TCP into Modbus TCP, OPC UA, MQTT, Huawei Cloud IoT, AWS Cloud and other protocols.
Modbus Gateway BL101 downstream supports: Modbus RTU Master, Modbus TCP Master, upstream supports: Modbus TCP, MQTT, Sparkplug B, OPC UA, Huawei Cloud IoT, AWS Cloud, Inductive Automation Ignition SCADA, ThingsBoard Cloud, Alibaba Cloud, and other protocols.
Modbus Gateway BL101 adopts an embedded Linux system, supports TSL, SSL encryption, provides 1 RS232/RS485 optional serial input, 1 power output, 2 Ethernet ports and 2 USB ports, and supports SIM card and SD card. The built-in 4G network or Ethernet access to the Internet has the characteristics of fast speed and low latency. It supports OpenVPN for secure data transmission.
The Modbus Gateway BL101 supports routing function and cascaded switch data collection, which is convenient to collect more industrial equipment data. The software has complete software functions and covers most of the conventional application scenarios. Users only need to go through simple settings.
Features
-
Downlink support: Modbus RTU Master, Modbus TCP Master
Uplink support: Modbus TCP, MQTT, OPC UA, Huawei Cloud IoT, Alibaba Cloud IoT, AWS IoT, Golden Pigeon Cloud and other protocols. - Wide working voltage design, support 9-36V DC power supply, the interface is terminal mode, with two power input interfaces, you can choose one of them at will, and both are equipped with anti-reverse protection design.
- Support 1 power output, the output voltage is equal to the input voltage.
- Support 1 RS232/RS485 optional input.
- The serial port baud rate supports 2400bps-115200bps; the stop bit supports 1, 2 bits, the data bit supports 7, 8 bits, and the None, Odd, Even check modes are supported.
- Support 2 RJ45 Ethernet ports, 1LAN +1 WAN respectively, WAN port and LAN port can directly collect equipment or equipment on cascade switch, with link and data indicator, network port built-in isolation transformer, up to 2KV electromagnetic isolation.
- Supports POE power receiving (optional function), saving wiring costs.
- Supports routing function.
- Supports 4G function, APN parameters can be set.
- Supports Modbus RTU to Modbus TCP, transparent transmission protocol.
- Supports the RESET button to restore the factory function (long press in the power-on state until the indicator light goes out) to prevent parameter setting errors.
- Supports hardware watchdog, with high reliability.
- Metal shell construction provides protection with IP30 grade metal shell and system is safely isolated, especially suitable for industrial field applications.
- The device is small, 30mm (about 1.18 in) *83mm (about 3.27 in) *109.5mm (about 4.31 in), and supports wall-mounted installation and industrial rail installation.
Specifications
Power Supply
| Input Voltage | 9-36VDC |
| Power Consumption | Normal 85mA @12V, Maximum 117mA @12V |
Network Port
| Ethernet Port Specifications | 2xRJ45, 10/100MBPS, Adaptive: MDI/MDIX |
Serial Port
| Number of Serial Ports | 1 x RS232/RS485 (optional) |
| Serial Port Baud Rate | 2400bps-115200bps |
| Data Bit | 7,8 |
| Check Digit | None, Even, Odd |
| Stop Bit | 1,2 |
Power Output
| Output Voltage | 9-36 VDC (output voltage is equal to the input voltage) |
Sim Card
| Format | Drawer Interface, Supports 1.8V/3V SIM/UIM Card (NANO) |
USB Port
| Number | 1 Download Program + 1 Program Debugging |
| Specification | micro USB OTG |
4G
| Number of Antenna Ports | 1 |
| Antenna Interface Type |
SMA Hole |
| L-A Version |
WCDMA: B2,B4,B5 FDD-LTE: B2,B4.B12
|
Software Parameters
| Network Protocol | IPV4, TCP/UDP, DHCP, DNS |
| IPO BTaining Method |
Static IP/DHCP |
| Transparent Transmission |
(Support) |
| DNS |
Support |
| User Configuration |
PC Software Configuration, Supports Win XP, 7, 8 and 10 |
| Network Cache | Send Out: 8kbyte; receive; 8kbyte |
| Registration | Support Custom Registration |
| Heartbeat | Support Custom Heartbeat |
Environment
| Working Temperature/Humidity | -40-80ºC | 5-95%RH |
| Storage Temperature/Humidity | -40-85ºC | 5-95%RH |
Other
| Shell | Metal Material |
| Size |
L30mm X W83mm X H109.5mm |
| Protection Level | IP30 |
| Net Weight | 291.2g |
| Installation Method | Wall-Mounted or Rail-Mounted |
Downloads
Applications
